Skip to content

KOREX · Made to order

From design to after-sales support

We handle made-to-order products from the initial drawing through production and delivery to after-sales support. The bucket shown here is an example.

Assembly view of an excavator bucket, with Korean and English labels for the mounting lug, side plate and bucket tooth.
Assembly view
Side elevation of the bucket with its height H and its depth D.
Side elevation
Front elevation of the bucket with its overall width W.
Front elevation

W, H and D are the overall width, height and depth.

01Design

We ask about your needs and prepare a drawing.

First, we discuss the product you need, its intended use and specifications, then prepare a drawing. Customer review of the drawing before production is arranged as agreed for each order.

Assembly sequence

Excavator bucket

Side elevation of the bucket with its height H and its depth D.
Side elevation
Assembly view of an excavator bucket, with Korean and English labels for the mounting lug, side plate and bucket tooth.
Assembly view
Front elevation of the bucket with its overall width W.
Front elevation

02Production

Production follows the drawing.

The product is made to the drawing. We share photos of the work in progress as agreed for each order.

  • Welded steel bucket for an excavator on the workshop floor.

    Welding

    The shell, the side plates and the mounting lugs are welded into one body.

  • Wear blocks welded to the body of a bucket.

    Wear blocks

    Wear blocks are welded to the body.

  • Wear strips welded across the bottom of a bucket, with teeth on its cutting edge.

    Wear strips and teeth

    Wear strips are welded across the bottom, and the teeth are fitted.

03Inspection

We check the finished product against the drawing.

We compare the finished product with the drawing and check its dimensions and finish. For the bucket shown here, this includes the width, height and gap between the mounting lugs, as well as the welds and paint.

  • Front view of the bucket from above, with five numbered parts.

    Front view

    • 03측판Side plate
    • 04사이드커터Bolt-on side cutter
    • 05등판Bucket shell
    • 08립플레이트(장삽)Base cutting edge
    • 10투스Bucket tooth
  • The two mounting lugs and their saddle on top of the bucket, numbered 01 and 02.

    Mounting lugs

    • 01버킷 브래킷Mounting lug
    • 02브래킷 받침판Mounting saddle
  • A tooth, its adapter, the rubber retainer and the steel key, drawn apart and numbered 09 to 12.

    Tooth assembly

    • 09어댑터(샹크)Tooth adapter
    • 10투스Bucket tooth
    • 11투스 고정 고무Rubber retainer
    • 12투스 고정 키Steel locking key

04Packing and shipping

We use packaging suited to each product.

We share photos of the packaging before dispatch as agreed for each order. We prepare the shipping documents needed for customs clearance and receipt of the goods.

  • Buckets wrapped in black film and tied with straps.
  • Product wrapped in black film inside a shipping container.
  • Strapped wooden crates stacked inside a shipping container.

We ship according to the agreed purchase terms. For each order, we agree on the dispatch point, transport method (sea, air or courier) and trade terms, and send the goods to the delivery point specified in those terms. After delivery, you fit the product to your machine, and you can contact us with questions about installation.

05After-sales

We work with you to resolve product issues.

If you have questions after delivery, please let us know.

Contact us